slybunda Posted December 26, 2014 Report Share Posted December 26, 2014 Ok so retail for the entire bush kit includes vat etc is £403. I sell it for £363 Is that just the front wishbones? Link to comment Share on other sites More sharing options...
**BESTY** Posted December 26, 2014 Report Share Posted December 26, 2014 Is that just the front wishbones?No, the prices quoted are for the whole bush kit. I need to work out a price for the overhauled arms with new poly bushes. Sent from my iPad using Tapatalk Link to comment Share on other sites More sharing options...
slybunda Posted December 26, 2014 Report Share Posted December 26, 2014 Are you the guy who once posted a PIC of the gen 7 bushes showing around 12-14 bushes for everything inc arb bushes etc. I can't find the thread now search not being accurate enough. Also if using polybush for front and rear suspension arms does there need to be any specific toe setting or just run standard? Link to comment Share on other sites More sharing options...
**BESTY** Posted December 26, 2014 Report Share Posted December 26, 2014 No, not me. You can stick with standard settings for Geometry or if you have full adjustment a little more camber/castor is a good thing Link to comment Share on other sites More sharing options...
toiletduck Posted December 27, 2014 Report Share Posted December 27, 2014 I'm assuming you mean this one - cant imagine 140/190 are different? http://www.polybush.co.uk/assets/mailshots/admin/Celica_VVTI_140_2001__.pdf Link to comment Share on other sites More sharing options...
**BESTY** Posted December 27, 2014 Report Share Posted December 27, 2014 I offered the whole bush kits a little while back but there was no interest?Yes Toiletduck, thats the bushes i would use, UK made tried and tested Link to comment Share on other sites More sharing options...
Knighty Posted January 6, 2015 Report Share Posted January 6, 2015 Definitely something I'd be interested in! 1 Link to comment Share on other sites More sharing options...
**BESTY** Posted January 6, 2015 Report Share Posted January 6, 2015 Definitely something I'd be interested in! These are the first set of rear bush holders i have media blasted and powder coated with a fine texture. Im in the process of blasting the rear camber arms and will be powder coating them for the weekend. All arms and carriers will be sold on an exchange basis and fitted with Poly bushes. As previously mentioned the poly bushes are a good price on their own, but i am the cheapest on the net for them, then some labour and powder. These will all be available next week! I have the rear hubs to blast and powder, the hub flanges/bearings bolt to these,and have two bushes per side in the bottom of them. Full Gen7 Bush kits available also Link to comment Share on other sites More sharing options...
Recommended Posts