teegt4 Posted June 1, 2014 Report Share Posted June 1, 2014 Hi there. I've had a look around including the knowledge base but haven't found a definate answer. A while back I bought some spacers for my st205 gt4. Unfortunately that car has gone but would the spacers fit the gen 7 celica. The spacers are 10mm with a pcd of 5x100 . Is the centre bore the same on the gen 6 st205 gt4 as the gen 7? Ive found a chart which list the celica 90-99 and 99 on all with a bore of 54.1 . Is the st205 also 54.1? I know the pcd and stud pattern match. Thanks for any help. Link to comment Share on other sites More sharing options...
arizona Posted June 1, 2014 Report Share Posted June 1, 2014 (edited) Wheels are interchangeable between all the gens so i think the bore must be the same. I have gen 5 gt4 and gen 6, the 6 has some wheels on it from the gen 5 at the mo..the other 2 wheels on the gen 6 came from a gen 7 (my good alloys are in for repair) Edited June 1, 2014 by arizona 1 Link to comment Share on other sites More sharing options...
teegt4 Posted June 1, 2014 Author Report Share Posted June 1, 2014 Thanks arizona. I thought they would be. It seems toyota stuck to 5x100 pcd and a bore of 54.1 from 1990 right until the last of the celicas. Link to comment Share on other sites More sharing options...
SKINY Posted June 4, 2014 Report Share Posted June 4, 2014 i had my 5 rims on my 01 avensis d4d wagon before Link to comment Share on other sites More sharing options...
arizona Posted June 4, 2014 Report Share Posted June 4, 2014 Yep my spare Oz wheels got borrowed for ex fellas Avensis, ended up with a 7am angry visit to his house though armed with a jack and a breaker bar to repossess them in the end 2 Link to comment Share on other sites More sharing options...
BenP1977 Posted June 7, 2014 Report Share Posted June 7, 2014 Gen 4s have 54.1mm centre bore too. Ben Link to comment Share on other sites More sharing options...
Recommended Posts