Mitch Atheis Posted August 27, 2013 Report Share Posted August 27, 2013 Gradually finding points where its peeling and the weather is making it worse. Its a 12 yr old car so is expected. Do you guys have any home solutions for this? Is there a way of dealing with this bar a full panel respray?? Link to comment Share on other sites More sharing options...
foxxy Posted August 27, 2013 Report Share Posted August 27, 2013 Not really, if the lacquer is coming off it will continue so respray it is. Ive just had my boot and bonnet resprayed for the same reason. Link to comment Share on other sites More sharing options...
The Spectre Posted August 27, 2013 Report Share Posted August 27, 2013 You can just spray on more lacquer then blend it in with some polish or T-cut. My paint really bugs me with the amount of stonechips in it... However the plastidip kits look cheap hmmm..... Link to comment Share on other sites More sharing options...
Mitch Atheis Posted August 27, 2013 Author Report Share Posted August 27, 2013 I would like to try lacquering it to give the protection. As for the plasti dip, I know that it would probably peel the whole cars lacquer off when it comes round to removing it ! Link to comment Share on other sites More sharing options...
Chris H72 Posted August 28, 2013 Report Share Posted August 28, 2013 Get the lacquer on it ASAP or it will continue to peel and the paint underneath will fade. That's what happened on my spoiler which then needed a complete respray. Link to comment Share on other sites More sharing options...
Ghoulie Posted August 28, 2013 Report Share Posted August 28, 2013 Sorry to hijack but Ive got the same problem, would you have to re-do the whole panel or can it be blended in??? Link to comment Share on other sites More sharing options...
LiamGTR Posted August 28, 2013 Report Share Posted August 28, 2013 If the lacquer is the only problem on your car, consider yourself lucky! Link to comment Share on other sites More sharing options...
sirnoob Posted August 28, 2013 Report Share Posted August 28, 2013 Sorry to hijack but Ive got the same problem, would you have to re-do the whole panel or can it be blended in??? whole panel probably, blending it usually ends up being a visible difference (even if only a little), i'd say when it comes to paint, if you want something like that fixed you need to do a proper job or it'll come back and bite you on the ass Link to comment Share on other sites More sharing options...
Recommended Posts