Jump to content

T10 28-SMD LED Light Bulbs


Trebor4460

Recommended Posts

Fairly easy fella. In the boot take the plastic off the boot kid. Under there you will see some cables leading to where the locking mechanism is.

Undo the two ten mil bolts that hold the metal brackets on and take those off then You have to twist the light holders till they pop out. Really fiddly but once you do it once its easy :thumbs:

Link to comment
Share on other sites

I did this last week, looks alot better doesnt it

And i had some in my rear number plate but one went, so ordered 10 from honk kong for about 3 quid an they only took 2 weeks, So now have plenty of spares for next time one plays up :)

Link to comment
Share on other sites

These are the ones that I fit in mine. The reason I opted for these is that the original ones I twisted slightly when fitting and shorted them out causing a fuse to blow which caused me problems.

So I went for these so it couldn't happen again. A lot more expenisve though but they are pure white and not blue :)

Link to comment
Share on other sites

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.