budgetbondbile Posted March 9, 2018 Report Share Posted March 9, 2018 I'm just trying to re fit the rubber pedal covers back onto my pedals anybody got any tips on how to complete this seemingly near impossible task!! Link to comment Share on other sites More sharing options...
Old Red Celica Posted March 9, 2018 Report Share Posted March 9, 2018 Soften them up in hot water. Link to comment Share on other sites More sharing options...
Cleario Posted March 9, 2018 Report Share Posted March 9, 2018 Like orc said warm water to soften them, the ones I’ve had a nightmare with I spray a little hairspray on the pedal itself and then use it as lube. It’s slippery when you first spray it but dries sticky so it isn’t going to fall off like if you use WD40. Little trick i used when changing MTB grips too. 1 Link to comment Share on other sites More sharing options...
Kev 16v Posted March 9, 2018 Report Share Posted March 9, 2018 I use washing-up liquid as the lube. Link to comment Share on other sites More sharing options...
budgetbondbile Posted March 9, 2018 Author Report Share Posted March 9, 2018 Hey cheers for the tips guys I'll try them just trying to fit on tsport metal-like pedals you see gotta be one simplist but most awkward mods incidentally does anyone know how the gen 7 pedal foot-rest fits in and out as well? Link to comment Share on other sites More sharing options...
ams Posted March 9, 2018 Report Share Posted March 9, 2018 just give the rest a tug, use a screwdriver under it and pull Link to comment Share on other sites More sharing options...
budgetbondbile Posted March 9, 2018 Author Report Share Posted March 9, 2018 Cheers, and now just one more thing can anyone recommend a good chiropractor!! Think it d be easier trying to remove the pistons through the spark plug oles!! Link to comment Share on other sites More sharing options...
Recommended Posts