_Chris_ Posted March 30, 2016 Report Share Posted March 30, 2016 Someone didn't hold the ratchet head square when pulling the handle. I would suggest application of heat from a blowtorch then use an air chisel or SDS drill & chisel on hammer only. Hold towards middle first to make a notch then turn so it's hammering it undone. Link to comment Share on other sites More sharing options...
lovelock Posted March 31, 2016 Author Report Share Posted March 31, 2016 Someone didn't hold the ratchet head square when pulling the handle. I would suggest application of heat from a blowtorch then use an air chisel or SDS drill & chisel on hammer only. Hold towards middle first to make a notch then turn so it's hammering it undone. Blame the tyre shop! Didn't use a deep socket. Off now, 10 drill bits later. Link to comment Share on other sites More sharing options...
Recommended Posts