4ndee Posted April 26, 2014 Report Share Posted April 26, 2014 Took my caliper off last night. Lost a bit of brake fluid. After I bled it up I started the car and the fluid light stayed on. So I unplugged the sensor on the resivour and went out. I assume the sensor is built into the resivour. This a common problem? Link to comment Share on other sites More sharing options...
sadlebag Posted April 26, 2014 Report Share Posted April 26, 2014 Too up your fluid, should solve if Link to comment Share on other sites More sharing options...
4ndee Posted April 26, 2014 Author Report Share Posted April 26, 2014 Haha im not retarded its full Link to comment Share on other sites More sharing options...
sadlebag Posted April 26, 2014 Report Share Posted April 26, 2014 You'll be surprised at how many people don't do this, has just come on after you bled them? Make sure the float is floating and the switch is off the stop, they can get stuck on the odd occasion Link to comment Share on other sites More sharing options...
4ndee Posted April 26, 2014 Author Report Share Posted April 26, 2014 Yeah I lost fluid then filled it up and bled them jow wont go off. I didnt realise its a float ill check that Link to comment Share on other sites More sharing options...
4ndee Posted April 27, 2014 Author Report Share Posted April 27, 2014 FIXED isnt it amazing what looking at a car after sleep does. I looked and the float was it the top, so i took the cap and filter out and poked it with a 3/8 extension then hit the bottle and plugged it back in now its fixed lol Link to comment Share on other sites More sharing options...
Cleario Posted April 27, 2014 Report Share Posted April 27, 2014 Always good to fix things with a hit!! Link to comment Share on other sites More sharing options...
Recommended Posts