jim7564

left handside from the wiper motor silver colour box (igniter) below it is the coil pretty much next to the plate on the firewall

not quite finished yet but the 4 column things is strong enough to support the wheels,then altering my ramps the idea is to be able to drive car up so all 4 wheels are on these column thingies then able to remove the ramp and bit inbetween leaving it sitting just 4 columns

give me 5 min and i,ll get back to you,s

could some of you give an opinion as too what height/ground clearance is suitable for this, the arches can be adjusted lower if required or lowering the suspension,but drivability practicallity and looks to think about this side has the arches slightly lower which I think looks good but we dont want something resembling an offroad truck

hopefully the non car folk will think like most,what a waste of time effort and money,it would better to give them free bus passes,providing there electric wonder how it can be enforced someone like Dan could be firing his banned firearms at the time a car goes past the acoustic cameras,will it also work on loud music playing in the car

wow what a great future to look forward to,styling on those are second to none.human race is getting less and less intelligent as computers driverless cars self parking etc take over.now its too noisy,wonder if the same rules apply to aircraft/trains and even power tools. be aswell calling it a communist state.

THATS COOL LOOKING.gold badge to finish it off

BEAUTIFUL DAY certainly not up here in Scotland,raining all day.only day at home this week and it rains,so my celica will have to remain on ramps a bit longer, on a good note I can get on with something I promised a mate 6 months ago LOL MK2 Escort A1 picture

https://www.ebay.co.uk/itm/20x-BLUE-TUNER-STEEL-WHEEL-TUNER-NUTS-M12x1-5-fit-MITSUBISHI-TOYOTA-HONDA-MAZDA-/182820553660?hash=item2a90f443bc thats what i have wether they come in kawasaki green i,m not sure.but throw your locking nuts away before their stuck in the wheels, glad your happy with them

thanks for the kind words not a problem.its nice to meet a fellow member.those wheels certainly look the part on your celica,was it any different to drive with the bigger wheel and wider tyres.

https://www.amazon.co.uk/gp/product/B001EX2UKU/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

yes hes been on about selling them for a good while now,last i heard he had them extremely under valued.good luck with it

My first Celica absolutely loved driving it

was that GEOFFs CS from GT4OC down in Newcastle

interested to see if you notice any improvement with these bits and the leads.mine are still original leads although the dizzy cap rotor have been done. got these

nice wheels

you will find with that one the weld will stick to one surface as you cannot fine tune it (either min/max) nothing in between.mine (also crap) high/med/low on high it blows holes in the body medium it sticks to one side and low dont waste your time.small bottles of Argon gas last a few min,admittedly it did weld my filler pipe to my new fuel cap pretty well also i used it to weld my seats.but bodywork/panels its useless.granted i,m no expert with a mig,but if your going ahead try and look for one with a dial for the power the same as the speed of wire. i spend more time freeing the wire up replacing the flow wheels and dismantling the gun as the wire seems to stick in the shroud etc.the one i bought takes 2 folk to lift it but not used it yet.

in my opinion you will be wasting your time using a gasless welder outside in windy conditions,I,m not sure if gasless actually means welding without gas and a lot depends on what it is your welding.a lot of folk use Co2 instead of Argon etc (gasless welding butnot quite as your using something to substitute the gas) also how neat you want the welding to look.you will spend more time grinding and cleaning it up than you will welding its not the price of the welder but refilling the gas bottles makes it expensive as nowadays you have to have an account for the bottle (unless you know someone who will do it on the side) recently bought a mig 160 amp big piece of kit compared to my last one.my old one a migmate (more a hobby welder) cant weld anything outside esp in windy conditions always resort back to my stick welder,

S13 Nissan Silvia Rocket Bunny wide arches passed the 2mtr wide mark now

halfords socket spanner set sits on 2 hooks on the rear strutbrace