-
Posts
711 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Events
Gallery
Club Shop
Collections
Posts posted by **BESTY**
-
-
I have sold a fair few Polybush kits and associated parts.
I have heard nothing but good feedback on the kits for these cars. -
I can supply a HKS system cheaper than that!
-
Lee, have you considered the likes of HKS?
-
Motul
RBF600
-
Trying to figure out if you can get top mounts on the wrong side of the car?
Camber bolts willl go some way to rectifying this if you don't get it sorted.
-
What suspension did you get fitted?
-
the 8cm is reffering to how much thread is left in the lower mounts, only an issue if the car is going to be set with a VERY high ride height
To lower the car's ride height with the units fitted, raise the car, insert H & S blurb, loosen the bottom locking ring and twist the units by hand to the desired amount, tighten bottom locking ring back up.
It can take a a while to set up as you want them and level all round
-
Definitely something I'd be interested in!
These are the first set of rear bush holders i have media blasted and powder coated with a fine texture.
Im in the process of blasting the rear camber arms and will be powder coating them for the weekend.
All arms and carriers will be sold on an exchange basis and fitted with Poly bushes.
As previously mentioned the poly bushes are a good price on their own, but i am the cheapest on the net for them, then some labour and powder.
These will all be available next week!
I have the rear hubs to blast and powder, the hub flanges/bearings bolt to these,and have two bushes per side in the bottom of them.
Full Gen7 Bush kits available also
-
I offered the whole bush kits a little while back but there was no interest?
Yes Toiletduck, thats the bushes i would use, UK made tried and tested -
No, not me.
You can stick with standard settings for Geometry or if you have full adjustment a little more camber/castor is a good thing
-
No, the prices quoted are for the whole bush kit.Is that just the front wishbones?
I need to work out a price for the overhauled arms with new poly bushes.
Sent from my iPad using Tapatalk
-
Ok so retail for the entire bush kit includes vat etc is £403.
I sell it for £363
-
Yes, rear camber is adjusted via the Banana arm in which I'm looking to offer on an exchange basis poly bushed.
-
Worth noting I sell the bush kits for less than RRP prices
-
Euro car parts don't sell rear hubs or banana arms?
I can sell front wishbones with updated poly bushes for less than euro car parts wishbones.
Sent from my iPad using Tapatalk
-
Bushes for the banana arms are £70 just on there own.
Rear hub bushes £75.
Then powder coating, labour, postage it soon mounts up.
Complete bush kit retails at £336
But it would all be a bolt off bolt on affair.
-
I do the gen4,5 and 6 arms.
Looking at doing similar for the gen7 if there is a market for it?
Gen7 is a little different with having bushes in the rear hub, all of which I can blast, powder coat re-bush and sell on an exchange basis.
Fair amount of work.
Again I can do it if there is a market for it.
-
No press needed to fit them but you may need one to remove them or burn them out?
I'm looking into offering a service for the gen7 Celicas like I do for the gen 4, 5 and 6.
-
Yep, Me
I sell Polybush bushes.
Which actual bushes do you require?
-
I sell Hel lines if interested, various colours available
-
Message me with your requirements, I will sort you some prices
- 1
-
Toyota for 14 years, never had an issue.
-
How much are the Links from Ebay?
-
I can Supply Whiteline drop links if you wish.
I would need to check exactly what is available, Front/Rear, for each car.
Is corner weighting worth doing for non track cars?
in General Celica Discussion
Posted
Glad all is going well.
What's the plans with the rear camber arms?
Un-seize and adjust?